*Note: The first group are exhaust filters, followed by intake filters. F.O.B: Shipping Point.
Pre-Paid Freight (Free Shipping): Only applies to UPS Ground Service within the Continental 48 States. All Orders will ship complete, unless other arrangements are made. Orders exceeding $300.00 qualifies for prepaid ground freight, however handling charges still apply. The exceptions to our Pre-Paid Freight Policy are paint spray booth filters, oversize paint pot liners, clearance sale items, coatings, and floor paper.
-EXHAUST FILTERS-
Andreae Filters can be ordered securely online directly from here through our sister company Finish Systems!
The Andreae Standard filter is made of two pleated and perforated cardboard walls glued by their edges. The result of this unique design engineered by Andreae is the best disposable filter using the inertia separation principle.
The inertia separation principle of the Andreae Standard filter is the key to capturing the overspray of paint, glue, resin, fiberglass, tar, teflon, oil, grease, or any other airborne liquid particle, efficiently.
The paint particles are captured and retained outside the airstream in the holding pockets. Due to this separation the static pressure remains constant and the Andreae Standard filter lasts 3 to 5 times longer than fiberglass filters.
The Standard two pleated cardboard walls capture 97% of high solids and holds 4 lbs. per sq. ft. of overspray. Three (3) cartons can be shipped by UPS.
Performances*
Paint Type
Filtration Efficiency
Holding Capacity
High Solids
97.0 - 98.1%
3.1 - 4.0 lbs/s.f.
Bake Enamel
93.0 - 94.5%
1.3 - 2.4 lbs/s.f.
Fast Dry Enamel
96.0 - 96.9%
0.7 - 0.9 lbs/s.f.
*Tests conducted with modified ASHRAE procedures and equipment 52-76
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Description
1-2 Ctns. Qty.
3-5 Ctns. Qty.
6+ Ctns Qty.
29-0359FS
36"x30' Andreae Standard Filter
The Andreae HE+ filter is made of two pleated and perforated cardboard walls glued by their edges with an additional thin layer of polyester on the rear face. Two (2) cartons can be shipped by UPS.
Performances*
Paint Type
Filtration Efficiency
Holding Capacity
High Solids
98.75 - 99.1%
3.5 - 5.3 lbs/s.f.
Bake Enamel
97.8 - 99.15%
1.5 - 3.1 lbs/s.f.
Fast Dry Enamel
98 - 99.2%
0.9 - 1.3 lbs/s.f.
*Tests conducted with modified ASHRAE procedures and equipment 52-76
Within the past several years we have seen several flat line finishing machines from cmpanies such as; CATTINAIR, CEFLA, DELLE VEDOVE, GIARDINA, MAKOR, STILES, and SUPERFICI using the standard Andreae filter but in widths of 22", 27-1/2" and 29". Please call us for pricing on providing this nedia cut to your width and length.
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Description
1-2 Ctns. Qty.
3-5 Ctns. Qty.
6+ Ctns Qty.
29-0775FS
36"x30' Andreae He+ Filter
The Honey Comb design in the white polyester pads provides great overspray filtration efficiency of 99.84%, and an incredible 6lbs. holding capacity per S.F. flammability rating UL Class 2. Typical filter depth of 1.75" - 2.25".
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Description
1 Ctn. Qty.
2-4 Ctns. Qty.
02-PP2020-30
Pre-Cut Exhaust Filter Pads 20" x 20", 30 per carton, p/n 02-PP2020-30 replaces Binks p/n 29-2371-30 and Team Blowtherm Industrial p/n PP-2020-K30
02-PP2025-30
Pre-Cut Exhaust Filter Pads 20" x 25", 30 per carton, p/n 02-PP2025-30 replaces Binks p/n 29-2358-30 and Team Blowtherm Industrial p/n PP-2025-K30
Honey Comb Roll Type Exhaust Filters are 50' in length and come in the following widths, packaged in plastic bags which are UPS shippable up to 40" wide.
These items Ship Separately. They DO NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Roll
1 Roll Qty.
2-3 Rolls Qty.
03-PP2450
24" x 50' Replaces PP-2450-K1
03-PP3050
30" x 50' Replaces PP-3050-K1
03-PP3650
36" x 50' Replaces PP-3650-K1
03-PP4050
40" x 50' Replaces PP-4050-K1
03-PP4550
45" x 50' Replaces PP-4550-K1
$183.58
Motor Freight Only Call for Order
$177.19
Motor Freight Only Call for Order
03-PP4850
48" x 50'
$195.80
Motor Freight Only Call for Order
$188.99
Motor Freight Only Call for Order
03-PP6050
60" x 50'
$244.76
Motor Freight Only Call for Order
$236.25
Motor Freight Only Call for Order
Arrestor Paper Exhaust Filter Pads with Polyester Backing, 60 pads per case. With the polyester back only one pad per cell, rather than two of the arrestor without the polyester backing.
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Pad Size
1 Ctn. Qty.
2-3 Ctns. Qty.
203232-60
20" x 20"
203231-60
20" x 25"
Arrestor Paper Exhaust Filter Pads without Polyester Backing, 70 pads per case. Normally two pads are used per cell.
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Pad Size
1 Ctn. Qty.
2-3 Ctns. Qty.
203032-70
20" x 20"
203031-70
20" x 25"
Paper Rolls
Arrestor Paper Exhaust Filter Rolls with or without polyester backing, used as primary or pre-filter to collect paint overspray.
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Roll Size
1 Ctn. Qty.
2-3 Ctns. Qty.
203039-45
45" x 40' without poly backing
203366-45
45" x 30' with poly backing
Fiberglass Paint Spray Booth Exhaust Filter Pads, 15 gram wt. fiberglass, 1-1/2" loft, 50 or 100 pads per carton.
Part #
Pad Size
CTN. QTY.
1 Ctn. Qty.
2-3 Ctns. Qty.
14AGP202050
20" x 20"
50
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
14AGP202550
20" x 25"
50
Fiberglass Rolls
Arrestor Fiberglass Exhaust Filter Rolls used as primary or pre-filter to collect paint overspray. The removal efficiency of our 15 gram is 94%, and the 22 gram wt. media is 96.5% efficient.
15 Gram Wt. Rolls
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Roll Size
1 Ctn. Qty.
2 + Ctns. Qty.
14AG30X300S
30" x 300'
14AG36X300S
36" x 300'
14AG48X300S
48" x 300'
14AG60X300S
60" x 300'
$214.96 Motor Freight Only
$207.48 Motor Freight Only
22 Gram Wt. Rolls
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Roll Size
1 Ctn. Qty.
2 + Ctns. Qty.
14AG30X300
30" x 300'
14AG36X300
36" x 300' Replaces 217-095
14AG41X300
41" x 300'
14AG48X300
48" x 300' Replaces 217-088
-INTAKE FILTERS-
Pre-Paid Freight (Free Shipping): Only applies to UPS Ground Service within the Continental 48 States. All Orders will ship complete, unless other arrangements are made. Orders exceeding $300.00 qualifies for prepaid ground freight, however handling charges still apply. The exceptions to our Pre-Paid Freight Policy are paint spray booth filters, oversize paint pot liners, clearance sale items, coatings, and floor paper.
Standard Intake or Ceiling Panel Filter with Tackafier, the 55 series panels are the Industry Standard on Crossdraft Automotive and Industrial Booths. Two layer green and white self-sealing panel with tacky adhesive on backside, 92.5% efficient at 10 micron. Wire frame inside.
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Panel Size/Qty.
1 Ctn. Qty.
2-3 Ctns. Qty.
01-552020-20
20" x 20"/20 per ctn
01-552025-16
20" x 25"/16 per ctn
01-552048-10
20" x 48" Bi-fold/10 per ctn
01-552048S-24
20" x 48" Single Frame/24 per ctn
Intermediate Intake or Ceiling Panel Filter, up-grade from standard panel filter above. Better filtration efficiency at 10 micron. Tackafier on inlet wire frame, heat sealed, and self-sealing panel.
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Part #
Size/Qty.
each Qty.
01-FR2020-20
20" x 20" each
01-FR2025-16
20" x 25" each
Part #
Size/Qty.
1 Ctn. Qty.
2 Ctns. Qty.
01-FR2048-10
20" x 48" Bi-fold - 10 per carton
AFR-1 Intake or Ceiling Panel Filter, engineered to assure superior performance on all crossdraft and semi-down draft paint spray booths. High dust holding capacity and low resistance to airflow. Scrim backing, three layers, and self-sealing panel. Pre-cut pads are also available.
This item Ships Separately. This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.