Bench Booths

Global Finishing SolutionsTM Bench Booth
Your spray booth is an investment that pays many dividends by providing a cleaner painting environment for a better quality finish, a means of increasing productivity, and a superior working environment for your finisher.

NOTE: Our booths have pre-punched flanged panels with a fold-back and are assembled with Grade 5 nuts and bolts. Many competitor brands require assembly with Tek Screws. Not only is it difficult to get the Tek Screws to be uniform, invariably the panels will not hang square. This is a serious problem when it becomes time to hang booth doors. The combination of keeping Tek Screws uniform and panels square adds 50% to the assembly time. Bench booths are FOB: Osseo, WI.

Bench Dry Filter Spray Booths
Global Finishing SolutionsTM Bench Booths are supplied with:

  • Shipped in 3 to 5 days
  • High Efficiency Exhaust Fan
  • TEFC type, 3 phase Multi-Voltage (208-230/460/60 Hz/3 PH and 575/60/3) Electric Exhaust Fan Motor
  • One Complete Set of Filter Media
  • Manometer (Draft Gauge)
  • Some models offer top and rear exhaust. Check with us to see if this applies to your booth.
  • Class 1 Division 2 4-Tube Fluorescent Light Fixture(s), including Tubes, which can be wired for 120V or 277V single phase. Standard with 5' 0" and 7' 6" wide models
  • Allow 2' to booth height for top exhaust or 2' to booth depth for back exhaust.
Easy Assembly
This booth's tough 18-gauge corrosion resistant panels are designed for fast, easy assembly, while creating a strong, rigid structure. High quality assembly hardware and illustrated assembly instructions are included.

IFPG-07 $2155.00
7'6"W x 7'2"H x 3'4"D
Overall Depth 6'2"
18" Exhaust Fan

IFPG-05 $1972.000
5'0"W x 7'2"H x 2'8"D
Overall Depth 5'2"
18" Exhaust Fan

IFPG-03-BT $1820.00
3'0"W x 3'4"H x 2'D
FP-3-BT without stand
12" Exhaust Fan

IFPG-03 $1894.00
3'0"W x 3'4"H x 2'D
Overall Depth 5'2" with stand
12" Exhaust Fan

Contact us for all your
Global Finishing Solutions
industrial spray booth needs!


** Note: Spray Booths, Booth components, and parts shipped to the following States are subject to the appropriate State or County tax unless your company can provide documentation of being tax exempt. These States are : AL, AZ, CA, CO, FL, GA, IL, IN, IA, KS, MD, MA, MI, MN, NE, NV, NC, ND, OH, OK, PA, RI, SC, SD, TN, TX, UT, VA, WA, WV, WI, and WY.

BEWARE of design and specification differences between GLOBAL FINISHING SOLUTIONS and other makes of booths. If they do not mention these design and or specifications they may not be proving them.

  • 2" flanged panel with rolled edge for additional strength, 18 gauge G90 galvanized.
  • Reinforced roof panels on booths wider than 12'.
  • Punched panels on CNC equipment for exact alignment with nut & bolt assembly.
  • Full height filter wall, not partial.
  • Sparkless fan blade with variable pitch pulley, AND FAN GUARD.
  • "Listed Class 1, Division 2 light fixture such as ETL or UL. INSIDE ACCESS, 32 watt with 85 CRI color correctable tubes.
  • Optional exhaust filter media.
  • Totally enclosed fan cooled (TEFC) 208/230/460 tri-voltage 3-phase fan motor.
  • Fire curtain with NFPA & OSHA Warning Decals.
  • Manometer.
  • Complete assmbly instruction and necessary hardware.

Content Copyright © 1997-2014 by  Auto Finish Systems, 2691 S. Calhoun Road, New Berlin, WI 53151 - 262-784-5977     online.